What Model Of Far Infrared Sauna Should You Buy?

Buying a far infrared sauna is the same as purchasing a new car or a major kitchen appliance. It’s going to enhance your life significantly, but you need to do a little research instead of just slapping down some money for the cheapest or the first one you see. Safety should be one of the top priorities on your list, as well as affordability and dependability. This is what you should look for as you peruse the different far infrared sauna models on the market.

You Can Tell A Lot From the Assembly

How a far infrared sauna is assembled will tell you a lot about its quality. Exterior clips and buckles are never a good sign. They are a slapdash way of holding a sauna together, and it probably means that its tolerance limits are low, or the hardware could be misaligned. Walls that are too narrow or too wide are also red flags. It is likely that they will bow and warp over time. There should also be no magnets. Magnets with a far infrared sauna might be included to hold the sauna in place if it should bang up against a wall. They also don’t provide the tight fit for the components that you’ll want, and they can let in cold air.

What you want is a bolt-and-anchor assembly system, with pre-drilled, precise hole alignment. Side panels that are secured with countersunk steel anchors will make sure that the front and back panels aren’t going anywhere. With the bolt-and-anchor models you can also reassemble it easily in case you have to move your sauna at some juncture.

How Thin Are the Walls?

Thin walls are also an easy giveaway that you’ve bought an inferior model. Many manufacturers cut corners there, so feel the walls and test them out before you buy. Thin walls don’t hold heat well, and bowing and warping as time passes is almost guaranteed.

The solution is to get a model with walls that are between 7-9 mm thick. Walls of that thickness will hold fast for years to come. You should also look for models where the wood is vertical grained tongue and groove. Horizontal grain wood is used in saunas that are likely cheaper, but these are flimsier and bound to give you problems sooner or later.

You don’t want to settle for inferior quality as you pick the far infrared sauna that you are going to install in your home. Your family needs to be safe and comfortable in the sauna, and that means doing a research and making sure you’re buying a high-end product.